Smart Motion Detection14
9. Click Apply.
14.3 Searching for Person & Vehicle Detection Events (Smart Search)
Smart Search lets you filter recorded video to search for person detection events, vehicle detec-
tion events, or both.
NOTE
In order to use Smart Search, you must configure at least one channel’s smart detection settings. See the proce-
dure above for full instructions.
To perform a Smart Search:
1. From the Live View display, right-click to open the Quick Menu, then click Smart Search.
2. Select a channel to search for detection events from, or select All.
3. Enter a start and end time for your search.
4. Next to Event Type, select Person, Vehicle, or All.
5. Click Smart Search.
#LX400117; r. 6.0/57895/57895; en-US 46
To Next Page
Loading...
