Using the Main Menu16
3. Check Enable to use P2P, or uncheck to disable.
4. Click Apply.
16.4.8 Configuring Video Loss Settings
Configure video loss settings and how the system reacts to a video loss event. Video loss means
that video from one or more cameras was interrupted or disabled. It could be caused by a number
of factors, such as a loose or damaged connection, loss of power to a camera, or a blocked cam-
era lens.
To configure video loss settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click
, then click EVENT. Click the MOTION tab on the side panel, then click
the Video Loss tab on the top panel.
3. Under Camera, select the channel you would like to configure.
4. Check Enable to enable video loss events for the selected channel.
#LX400117; r. 6.0/57895/57895; en-US 73
To Next Page
Loading...
