Smart Motion Detection14
The system supports detection of people and vehicles with compatible IP cameras only. This
helps deliver more relevant notifications when using the app for remote viewing. You can also
link white light deterrence to person and/or vehicle detection on compatible Lorex deterrence
cameras for an added level of smart security.
14.1 Ensuring Accurate Person & Vehicle Detection
The following are important camera installation notes to ensure accurate Person & Vehicle detec-
tion. Refer to the documentation that came with your camera or search for your camera model
number at
lorex.com for full mounting instructions.
• Choose a location where objects of interest will be no further than 50ft (~15m) from the
camera.
• Angle the camera so that objects of interest appear in the bottom ⅔ of the camera image.
• Angle the camera between 30~60° down from the level position.
• Install the camera between 8-16ft (2.5-5m) off of the ground.
#LX400117; r. 6.0/57895/57895; en-US 43
To Next Page
Loading...
