Using the Main Menu16
2. Click , then click SYSTEM. Click the GENERAL tab on the side panel, then
click the Holiday tab on the top panel.
3. Click Add Holidays.
4. Configure the following:
• Holiday Name: Enter a name for this holiday.
• Repeat Mode: Select Once for the holiday to occur only this year or Always for the holi-
day to be repeated each year.
• Holiday Range: Select Date to select a specific date, or select Week to select holidays
based on which week they fall on.
5. Click Add. Now that you have added a holiday, an extra holiday setting is added to the re-
cording schedule.
NOTE
You cannot delete holidays, but you can disable them by selecting Off under the Status drop-down, then
click Apply.
#LX400117; r. 6.0/57895/57895; en-US 81
To Next Page
Loading...
