Lovol FR18E-u - Guide for Accessories; Guide for Working-Device; Out-Of-Service

Technical specifications
Technical specifications 7-
3
Guide for accessories
Guide for working-device
The following table lists accessory combinations that can be fitted to standard and long bucket bars
○： You ca n us e
△： Use as light duty as possible
×： Out-of-service
Note:
● When the ex cavator i s installed with the long bucket-arm and if the bucket retract to the direction of the
excavator, the bucket-arm may have the interference to the excavator. Be careful to operate the long
bucket-arm; Handle lo ng bucket bars carefully;
● When the excavator can excavate at an inclined angle and the movable-arm drops down completely, the
movable arm may have the interference to the chassis. Be careful to operate the movable-arm.
Scope of use:
General excavating: excavating or loading the sand, gravel or clay, Excavation or loading of soil, san d, soil and
building debris;
To dig: Digging ditches for cables, pipelines and waterways;
Note: we do not undertake the guarantee for the damages caused by user’s improper operation!
Name Bucket
tooth
mounting
pin
Category Capacity Outside
width
of
bucket
body
mm
Lateral
width
of side
edge
teeth
mm
Use Standard
bucket
rod
Extended
arm
Standard
bucket
Vertical Standard
parts
0.04 400 450 General
excavation,
loading
○
△
Narrow
bucket
Ver ti ca l Th e
choose
and buy a
0.027 297 347 Narrow
trench
excavation
○○
Wide
bucket
×××××× ××
T rench
b
ucket
×××××× ××
Hammer The
choose
and buy a
Broken
homework
××