Lovol FR18E-u - Open, Close, Install and Remove All Parts

Operation control
Operation control 2-
10
Open, close, install and remove all parts
1. Seat adjustment
Note:
* When starting the en gine and putting the seat
forward, it may touch the driving handle and cause
the car body to move. Be sure to turn off the engine
and place the h andle lock lever in a "locked"
position before putting the seat forward
* Make sure the seat is firmly fixed after
adjustment.
 Pull the back and forth ad justment handle to the right to make the seat move back and forth. Lift up the
adjustment lever on the left side of the seat to adjust the Angle of the seat back. Please adjust your seat
to a position convenient for driving. Make sure the seat is secured after adjustment.

When putting t he seat forward, place the handle lock lever in the "lock" position, then turn off the en gine,
pull the lock lever forward, and lift the seat.

After the seat is restored to its original position, please operate th e seat lock lever to secure the seat
firmly.
2. Open and close the rear cover
Note:
* Be careful of clamping when closin g the rear
cover.
* After closing the cover, please make sure to lock
it tightly.
 Insert the starting key into the keyhole and turn
to the right. When the key is in the vertical
direction, it can be unlocked. When opening the
rear cover, press the b utton to open the rear
cover horizontally.

When fixing the rear cover, use the locking lever
to fix it.
Remove
Remove
Forward/Rever
se lever
Lock
Handle
lock lever
Bridge lock lever
Remove
Loc
k
Lock lever