Lovol FR18E-u - Positions to Fill the Grease into the Hydraulic Crusher

Accessory
Accessory 8-
6
Positions to fill the grease into the hydraulic crusher
Fill the grease into the h ydraulic crusher at the correct position
Note:
If the grease is filled into the hydraulic
crusher at the incorrect position, the
excessive grease will be filled into the
crusher. As a result, the soil and sand may
enter into the hydraulic circuit and damage
the hydraulic device when the crusher is
used. Therefore, the grease is filled into the
hydraulic crusher at the correct position.
Incorrect
Do not add grease when th
e
b
reake
r
body is on the side
Apply grease with the chisel i
s
p
ressed into the ground
Right
Incorrect
Do not add grease when th
e
chisel is off the ground
Chisel