Accessory
Accessory 8-
5
Precaution 1：
Please break the hammer head vertically on the
striking surface. In addition, in the crushing
process should pay attention to always apply thrust,
do not empty hit.
Precaution 2：
If the same striking surface cannot be broken and
chiseled within 1 minute, please ch ange the
striking surface and chisel from the top to make it
broken.
Precaution 3：
When pulling up the hydraulic hammer, be careful
not to make the hammer head touch the moving
arm or the movin g arm cylinder.
Precaution 4：
Please make sure the ground under your feet is
firm before proceeding.
To Next Page
Loading...