Accessory
Accessory 8-
4
6. Do not conduct cru shing operation when the oil
cylinder is at the end of the jo urney
If the oil cylinder of the machine is at the end of
the journey (the state when the oil cylinder is at the
maximum extension position or the maximum
contraction position), the oil cylinder or various
parts may be damaged.
7. Lifting operation is allowed
It is forbidden to use hydraulic fracturing hammer
for lifting operation.
8. Prohibit operation when the machine faces the
side
Do not break the machine when it faces to the side.
Otherwise, it may cause the car to roll over and
shorten the service life of the wheel part.
9.
Horizontal and topside crushing operations are
prohibited.
10.
High altitude crushing is prohibited. Otherwise, it
will cause rockfall and rollover.
To Next Page
Loading...