Operation
Operation 3-
3
Check before starting
1. Daily check
Routine
inspection
items
Item Quantity
Grease, parts to be replaced o r
replaced
Problem areas from last use — —
Check and replenish cooling water 1 —
The
amount
of oil in
each part
(1) Fuel inspection and
replenishment
1
Choose suitab le diesel fuel according
to local temperature
(2) Check and replenish oil 1 Engine oil (CF grade)
(3) Check and supplement the
working oil
1Theworkingoil
The part
of a
working
device
that is
lubricated
(1) Bucket p in 4
Add extreme pressure grease EP2
(2) Swing fulcrum pin 2
(3) Root of moving arm 1
(4) Movable arm cylinder boss 2
(5) Root of bucket bar 1
（6） Bucket-arm Oil cylinder 2
(7) Shoveling oil cylinder 1
(8) Swing cylinder 2
(9) Shoveling oil cylinder 2
(10) Shoveling root pin 2
Check and clean the water and sediment in
oil-water separator
——
Inspection and cleaning of radiators and oil
coolers
——
Battery, wiring, engine around the
inspection, cleaning
——
Inspection of roof in stallation — —
Attention when washing the car — —
To Next Page
Loading...