Operation control
Operation control 2-
5
3. Buckle and Release Safety Belt
Warning
Safety bel ts are for the safety of the operator and should be fastened at all times during
work. Before work, adjust the seat to the desired position for easy and comfortable
operation and buckle the safety belt. The safety belt should be properly fastened to
reduce the possibility of accident and the seriousness of the injury. Do not enlace the
safety belt around the abdomen. Do not stand in the cabin when you operate the
excavator. Do not adjust the seat position while the device is in motion. This will cause
loss of control. Chec k the safety belt and seat belt mount before putting on your seat belt.
Do not use the safety belt when it i s kinked. Replace the damaged or damaged s afety belt.
Insert the belt end ① into the socket ②. Tense the safety belt to check if it is tightly fastened.
Adjust the safety belt to ideal length depending on th e operator ’s body size.
To unbuckle the safety belt ①, press the button ③ on the socket ②.
Warning
To Next Page
Loading...