Inspection, Maintenance and Adjustment
Check, maintain and adjust 4-
7
IMPORTANT
Do not use unsold lu bricants, an d do not use products that have not been approved by Lovol Construction
Machinery Group Co., Ltd
Factory Hydraulic oil Engine oil Grease Gear oil
Callex
（Castrol）
Callex HD 32 Callex RPM
Delo 300
Multifac EP Multi-Purpose
EP90
Exxon/Esso NUTO(anti-wear)
HD 32 or 48 or
Teresstic(anti-rust)
Exxon XD-3
straight Weight or
10 W- 30
Ronex MP #2
or cold temp use
Ronex MP #1
Spartan EP220
or Exxon GX
80 W90
Idemitsu Kosan Daphne Kosan
46WR
Apopoil
motire S300
Daphne
corrone #2
Aporoil Gear
HE 90
Mobil
(Mobil)
Delvac 1300
Super 10W-30 or
Delvac 1 or
Straight Weight
Mobil FAW #2
Or cold temp use
Mobil FAW #1
Mobilube HD
80 W-90
Nippon
Seikiyu
Super
Highland
S26 or 32
High D.S3
Straight Weight
Lipanoc
Grease
Niseki SP90 or
EP 90
Shell
（Shell）
Tellus 32 Rotella T
10 W - 30 or
T30(winter)or
T40(summer)
Alvania EP # 2 Spirax HD
80W90 or
DONAX TD
(Transmission)
Total Total Equivis
ZS46-Ⅲ
Total Rubia6600
10 W -30
Total Multris
EP#2
Total
DA80W90
IMPORTANT
All a gricultural excavators produced by our company use JOMO HYD N46 hydraulic oil, St. Maria CF-4
10W-30 oil, Mobilube HD 80W-90 gear oil, so it is required to u se the same oil of the original vehicle, so as to
avoid mixing different oil products when changing oil products.
When the temperature of hydraulic oil is subject to sharp change once a day or once a week, or when you
operate the machine at temperature less than 0℃, we reco mmend you use lubricant with smaller specific
gravity. We recommend you choose lubricant depending on the ambient temperature.
Lovol Construction Machinery Group Co., Ltd requires that you use genuine lubricant and grease.
Yanmar Engine requires that you use API CF4 or better engine oil.
To Next Page
Loading...