LPKF ProtoMat E34 - Structure and Function; Brief Description; Scope of Delivery

Structure and function
ProtoMat E34/E44
20/78
LPKF Laser & Electronics AG | V. 1.0
3 Structure and function
This chapter describes the technical structure and the functions of the system.
3.1 Brief description
The system consists of three essential functional units:
 Processing table
 Processing head with:
 Milling spindle
 E44: additionally with camera
 xyz positioning system
3.2 Scope of delivery
This chapter provides an overview of the system's scope of delivery. For information
on optional modules, accessories and extras refer to chapter Optional modules,
accessories, extras on page 25.
 ProtoMat version E34 or E44
 Power supply unit with:
 Mains cable 230 V AC
 Mains cable with US standard plug 115 V AC
 Drilling underlay plate
 Data medium Documentation
 Data medium CircuitPro PM
 Basic reference ProtoMat E34/E44
 Accessories bag ProtoMat E series containing:
 1 x Soft brush
 2 x Reference-hole strips 100 mm (red)
 1 x 19-mm-wide adhesive tape (roll of 10 m)
 2 x Reference-hole drills 1/8" shaft, 17 mm, d = 2.95 mm
 5 x Dowel pins 3m6x8 (ISO 8734)
 1 x Mains cable 125 V AC
 1 x USB cable
 1 x Press-fit tool (for dowel pins)
 1 x Extraction hose
 2 x Set screws with Torx drive and rounded head
 1 x Torx wrench T20
 1 x Collet brush 4 mm
 1 x Flanged bushing Ø12
Data medium Documentation
The data medium contains the following:
 User manual ProtoMat E34/E44
 Basic reference ProtoMat E34/E44
 User manual CircuitPro PM
 How-to guide CircuitPro PM