LPKF ProtoMat E34 - List of Tables

ProtoMat E34/E44
Appendix
V. 1.0 | LPKF Laser & Electronics AG
77/78
Fig. 52: Cleaning the tool..........................................................................................63
Fig. 53: Dowel pin and insertion tool ........................................................................63
Fig. 54: Inserting the dowel pin ................................................................................64
Fig. 55: Inserting the dowel pin ................................................................................64
Fig. 56: Inserted dowel pin .......................................................................................64
Fig. 57: Icon tool magazine ......................................................................................65
Fig. 58: Manual tool exchange .................................................................................65
Fig. 59: Tool Exchange .............................................................................................65
Fig. 60: Inserting a tool .............................................................................................66
Fig. 61: Insertion tool ................................................................................................68
Fig. 62: Loosening the locking screw .......................................................................69
Fig. 63: Removing the tool .......................................................................................69
Fig. 64: Cleaning the collet .......................................................................................69
Fig. 65: Fault monitor pane ......................................................................................70
Fig. 66: Pane Messages ...........................................................................................71
Fig. 67: Declaration of conformity .............................................................................78
10.2 List of tables
Table 1: Accessories kit E34/E44 ..............................................................................21
Table 2: Extraction system ........................................................................................25
Table 3: Pin assignment D-sub 25-pin ......................................................................27
Table 4: Displays and control elements ....................................................................28
Table 5: Climatic conditions.......................................................................................34
Table 6: Maintenance schedule for the maintenance personnel of the operator ......67
Table 7: Fault monitor ................................................................................................70
Table 8: Fault monitor icons ......................................................................................71
Table 9: Pane Messages ...........................................................................................72
Table 10: Fault table ....................................................................................................73