LPKF Laser & Electronics AG | V. 1.0
Health hazard by insufficient filtration!
Filters cannot be cleaned or reused. If you are using saturated, defective or no
filters at all, filtration of particles that can be harmful to health is not guaranteed.
Only operate the system with installed and working filters.
Observe the recommended maintenance intervals and replace the filters in
time.
Dispose of the saturated filters properly. Observe the local disposal regulations.
Health hazard by gases or dusts!
Processing materials with laser beams can produce gases or dusts hazardous to
health.
Only process materials that are approved by LPKF.
Always ensure that the extraction system is switched on and working properly.
If you are using other accessories, refer to the manufacturer’s manual for more
information.
All consumables and tools can be found in the product catalog. They can be ordered
individually or in kits.
3.6 Connections
This chapter describes the connections of the system that are located on the rear.
1 Socket, for connecting the mains cable
2 USB 2.0 socket, type B, for connecting the
system to the PC
3 25-pin D-sub connector for connecting the
extraction system
4 Extraction fitting for connecting to the
extraction system
To Next Page
Loading...