V. 1.0 | LPKF Laser & Electronics AG
General information
This document contains all information for the intended use of the system/product
delivered. This document is intended for persons with basic knowledge of installation
and operation of software-controlled systems. General knowledge of operational
safety as well as basic knowledge of using PCs running Microsoft Windows
®
are
required.
Read this document and possibly associated safety data sheets carefully before
first start-up and usage of the components.
Observe the safety regulations as well as the regulations on operational health
and safety and protection of the environment.
Use the system/product only in a technically perfect condition.
Observe all labels and safety signs on the system/product.
Never remove the safety signs and replace or clean them if not readable anymore.
Persons who install, operate, uninstall, or maintain our systems/products must not
be under the influence of alcohol, other drugs, or medication that impairs the
ability to react.
Use only approved spare parts and accessories in order to prevent injuries due to
unsuitable spare parts and accessories.
Observe the technical data and ambient conditions specified in this document.
Validity
This document is part of the system/product and corresponds to the technical state at
the time of publication. This document has always to be present at the system/product
and has to be available to the operating personnel without restrictions, in a complete
and legible form and at all times. If the operator changes, this document has to be
handed over together with the system/product. The operator has to ensure that all
safety measures specified in this document are observed.
The operating personnel must have read and understood this document before
performing any task. A basic requirement for safe work is observance of all safety
notes and steps. This document contains important information about the
system/product that have to be observed when installing, first starting up, or
maintaining the system/product. Its structure allows trained personnel to perform all
tasks.
LPKF Laser & Electronics AG (abbreviated to LPKF in the following) reserves the right
to make changes in respect to the content of this document. The figures in this
document serve as basic understanding and can differ from the actual state of the
system.
To Next Page
Loading...