LS Industrial Systems SV iC5 Series User Manual

7. Function list
7-8
SV-iC5
Function group 2
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adjustable
during run
Page
H 0 [Jump code] 1/95 This parameter sets the code number to jump. 1 O 5-5
H 1 [Fault history 1] -  This parameter stores information on the
types of faults, the frequency, the current and
the Accel/Decel condition at the time of fault.
 The last fault is automatically stored in the
H 1- [Fault history 1].
nOn - 11-4
H 2 [Fault history 2] - nOn -
H 3 [Fault history 3] - nOn -
H 4 [Fault history 4] - nOn -
H 5 [Fault history 5] - nOn -
H 6 [Reset fault
history]
0/1  This parameter clears the fault history
saved in H 1-5.
0 O
H 7 [Dwell
frequency]
F23/400
[Hz]
 When run frequency is issued, motor starts
to accelerate after dwell frequency is applied
to the motor during H8- [Dwell time].
 [Dwell frequency] can be set within the
range of F21- [Max frequency] and F23- [Start
frequency].
5.0 X 10-5
H 8 [Dwell time] 0/10 [sec]  This parameter sets the time for dwell
operation.
0.0 X
H10 [Skip
frequency
select]
0/1  This parameter sets the frequency range to
skip to prevent undesirable resonance and
vibration on the structure of the machine.
0 X 9-20
H11
1)
[Skip
frequency low
limit 1]
0/400
[Hz]
 Run frequency cannot be set within the
range of H11 thru H16.
 The frequency values of the low numbered
parameters cannot be set above those of the
high numbered ones.
10.0 X
H12 [Skip
frequency high
limit 1]
15.0 X
H13 [Skip
frequency low
limit 2]
20.0 X
H14 [Skip
frequency high
limit 2]
25.0 X
H15 [Skip
frequency low
limit 3]
30.0 X

LS Industrial Systems SV iC5 Series Specifications

General

Brand	LS Industrial Systems
Model	SV iC5 Series
Category	Inverter
Language	English