LS Industrial Systems SV iC5 Series - Page 82

9. Basic functions
9-14
SV-iC5
 Note that setting Frequency Ref for Accel/decel (H70) is set to Max Freq and
target freq is set below Max freq. the shape of S-curve may be distorted.
 Accel/Decel Disable
Group LED display Parameter name
Set
value
Min/Max
range
Factory
defaults
Unit
I/O group
I20
[Multi-function input terminal
P1 define]
-
0/24
0
~ ~
I24
[Multi-function input
terminal P5 define]
24 4
 Select one terminal of I20-24 to define Accel/Decel disable.
 For example, if P5 is selected, set I24 to 24 to activate this function.
ON
Freq.
P5
Run
command
ON
ON
Freq
H17
H17 H18 H18
Accel/decel Ref
Freq (H70)
Target Freq
☞ Note
: If set target freqis
below Max freq, the
curve will not be shown
completely.