Chapter 4. Basic Features
28
In.89 In Check Time
Set the time for the inverter to check for
other terminal block inputs. If In.89 is
set to 100ms and a signal is supplied to the P8 terminal, the inverter searches
for other inputs over the next 100ms. When the time expires, the Acc/Dec
time will be set based on the input received at P8.
4.7 Stopping the Acc/Dec Operation
Configure the multi-function input terminals to stop acceleration or deceleration and operate the inverter at a
fixed frequency.
Group
Code
Name LCD Display
Setting
Range
Unit
65–71
configuration
Px Define(Px: P1–
P7)
0–54
P8
P9
Frequency
Acc0
Acc1
Acc2
Acc3 Dec0
Dec1
Dec2
Dec3
Run cmd
To Next Page
Loading...
Need help?
General
