(1) Precautions for operation with remote stage 1 & 2 connection
1) The following menus are not available if the types between the project presently open in
XG5000 and the CPU connected with stage 1 or 2 are not identical.
A) Write program and each parameter
B) Read program and each parameter
C) Monitor
D) Flash memory
E) Set Link Enable
F) I/O information
G) Compulsory I/O information
H) I/O SKIP
2) Execute the remote connection with applicable project open of the station to connect to
for XG5000 programming through remote stage 1 & 2 connections.
3) Up to 2 stages only are available for the remote connection. More than that is not available
for the remote connection.
(2) In case of remote connection via XGR redundancy
1) In case of remote connection via XGR redundancy, service is executed. T
To Next Page
Loading...