LSIS XP10BKA/DC - Page 161

Chapter 7. XGT Panel Function
7-7
(1) In the System Menu move the cursor to ‘5.Buzzer Volume Setting’ and press ENT key to display the Buzzer Volume
setting screen as shown below.
(2) Move the cursor to desired volume option and press ENT key to complete the Volume Setting.
(3) Press ESC key to return to System Menu Mode.
(4) Even if the power is off, the Buzzer Volume once specified will be permanently preserved until reset.
7) Backlight Set
Specifies Backlight On / Off.
(1) In the System Menu move the cursor to ‘6. Backlight Setting’ and press ENT key to display the Backlight Setting screen
as shown below.
(2) Move the cursor to OFF or ON as necessary and press ENT key to complete the Backlight Setting.
(3) Press ESC key to return to System Menu Mode.
(4) If the power is turned back ON after once turned OFF, the Backlight will return to default (ON).
Buzzer Volume Set
OFF LO
W
HIIGH
5. Buzzer Volume Set
6. Backli
g
ht Set
4. Date / Time Set
Backli
g
ht Set
OFF
O