Chapter 6. Panel Editor
6-56
6.9.5 Bar Graph Tag ( )
Displays current value of device with a shape of bar graph
In order to specify the property of the Bar Graph Tag, double-click Bar Graph Tag to display the Bar Graph Property setting
window as shown below.
The Location, Address, and Data in the Bar Graph Property should be set identically to ‘6.9.1 Numeric Tag’.
1) Graph
(1) Width: Specifies the width of the bar graph.
-. Available range 8 ~ 192.
-. Any other value than specified above will not be set.
To Next Page
Loading...
