Lucent Technologies Lineage 2000 User Manual

Lucent Technologies Lineage
®
2000 ECS/GPS Battery Plant J85500G-2
Issue 6 May 1999 Maintenance 5 - 7
7. Mount the replacement board to the distribution panel
using the hardware from Step 3.
8. Reconnect the following connectors:
J502 to P502
J508 to 508
J506 to P506
J501 to P501
J504 to P504
Wires to TB501
9. Close distribution panel.
Spare Parts
The following equipment may be ordered as spare parts. For
exact ordering codes, refer to recommended spares information
on the J85500G-2 drawing.
• Rectifiers and fans
• Circuit Breakers (Refer to ED83119-30)
• Fuses (1-200 ampere)
• LVD/Fuse Board (CP5)
• Fuses (F1 to F21)
• Controller Circuit Packs (Refer to the Controller manual)
• LVD/Fuse Thermal Compensation Board (BMD1)
• CU-216A Thermal Compensation Control Unit
In addition to these items, any piece part may be ordered that is
identified in the assembly views and stocklist on the J85500G-2
drawing. When ordering, please specify the Description and
Comcode as shown in the stocklist.

Lucent Technologies Lineage 2000 Specifications

General

Brand	Lucent Technologies
Model	Lineage 2000
Category	Power Supply
Language	English