MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
555-661-140
Issue 1
August 1998
Page 4-60
Module Problems
Console Display/Instructions Additional Information PC
The screen below appears only if the module passes the test.
The screen below appears only if the test fails.
Lines 3 and 4 identify the cause of the failure or the number of errors
found per B-channel. On an MLX module, there are 16 B-channels,
numbered 0 through 15. Line 3 displays the results for B-channels 0
through 7; Line 4 is for B-channels 8 through 15.
Interpreting Test Results
If the test completes successfully, the module’s board controller is functioning
properly. Continue with the next module test or restore the module if you are
finished testing. If the test fails, find the error message in Table 4–5
and
proceed as indicated.
%FK/RRSEDFN6ORW
YY
xx
= slot number entered in Step 2
%FK/RRSEDFNLQ3URJUHVV
([LW
%FK/RRSEDFN6ORW
YY
xx
= slot number entered in Step 2
%FK/RRSEDFN3DVVHG
([LW
%FK/RRSEDFN6ORW
YY
xx
= slot number entered in Step 2
%FK/RRSEDFN)DLOHG
YYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYY
([LW