Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
555-661-140
Issue 1
August 1998
Page 5-7
Checking Ports
■ A seizure of an outgoing tie trunk fails.
■ A transient error is reported. After four unsuccessful seizure attempts,
the port is marked
maintenance-busy and the error becomes
permanent.
■ The CO fails to disconnect.
■ A transient error is reported. After two occurrences, the port is marked
maintenance-busy and the error becomes permanent.
NOTE:
The test is not run on auto-out tie trunks.
Maintenance-Busy Programming
You can select 0DLQWHQDQFH%XV\ as a system programming option. If you do,
there is also a menu selection to include tie trunks.
Maintenance-Busy Status
See “Checking Ports” below for information about maintenance-busy status.
Checking Ports
You perform the following procedures from the maintenance terminal. By
selecting
3RUW from the Maintenance screen, you can check the
maintenance-busy status and other information for individual trunks and
extensions.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English