Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting

Page E-1
Modifying the Processor
MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
Issue 1
August 1998
MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
555-661-140
Issue 1
August 1998
E
E
Modifying a Release 2.1 or Earlier
Processor for Permanent Key Mode
Modifying the Processor
!
CAUTION:
This procedure must be performed for KF registration with the FCC.
This procedure prevents the system from being programmed as a
Hybrid-PBX system. Do this only if the system is programmed for Key
mode and GS trunks are not indicated on Form 2c, System Numbering:
Line/Trunk Jacks.
To modify the processor for Permanent Key mode, follow the steps below. Refer
to Figure E–1.
!Remove the processor from its packaging.
!Place the processor on a flat surface.
!If the feature module is installed, remove it.
See “Replacing the Feature Module” on page 4–32 for instructions.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English