MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
555-661-140
Issue 1
August 1998
Page 1-17
Using SPM
Table 1–1. Continued
PC Key Console SPM Function
<%/% n/a Reset. Reset the communications port. For example,
if the information on the screen is garbled, try exiting
from and then re-entering the screen. If the screen
remains garbled, use < +  to clear the screen
and return to the SPM Welcome screen. Note that
using < +  drops the modem connection.
<%/% n/a Browse. View print reports saved with Print Opts.
<%/% n/a Escape to shell. To use this key in sequence, you
must set DEBUG=1 in the SPM configuration file
ams.cfg. You can then use this key sequence to
execute DOS (or UNIX system) commands. To return
to SPM, type
FYJU.
1 Enter This key on your PC can be used instead of 
(Enter) when
(QWHU appears as a choice in the
7-by-24 console simulation window.
> Backspace > can be used instead of  when it appears
as a choice in the 7-by-24 console simulation
window.
9 Delete The 9 key on your PC can be used instead of 
(Delete) when it appears as a choice in the 7-by-24
console simulation window.
# n/a The up, down, left, and right arrow keys can be used
to highlight selections in a menu and to select the 20
line buttons below the 7-by-24 console simulation
window.