Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting
555-661-140
Issue 1
August 1998
Page 2-4
Error Logs
Console Display/Instructions Additional Information PC
!Select an error log option.
The most recent alarm message stays on the System Error Log screen
until it is replaced by another. The screen does not update the most
recent alarm while displayed; to see any updates, you need to exit this
screen and re-enter.
Checking Permanent Errors
Follow Steps 1 through 3 in “‘‘Error Logs’’ on page 2-1”. In Step 3, select
3HUPDQHQW.
Line 2 provides a brief description of the error code identified on Line 6. For
more information about an error code, see Table 2-6
.
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error’s last occurrence.
NOTE:
Depending on which entry you delete, you might clear an alarm. See
‘‘Alarms’’ on page 1-23
, for additional information about alarms.
6\VWHP(UURU/RJ
If you select /DVW , see

0DNHDVHOHFWLRQ
“Checking the Last 99 Errors,” page 2–5.
/DVW
If you select 3HUPDQHQW , see

3HUPDQHQW
“Checking Permanent Errors,” page 2–4.
7UDQVLHQW
If you select 7UDQVLHQW , see

PRVWUHFHQWDODUP
“Checking Transient Errors,” page 2–5.
([LW
3HUPDQHQW(UURUV!
YYYYYYYYYYYYYYYYYYYYYY
6ORW YY 3RUW
xx &RXQW YYY
Press the More button to page

)LUVW NNEEZZIINN
through the permanent errors.
/DVW NNEEZZIINN
&RGH YYYY
Press the Drop button to delete
7/I
([LW
an error log entry.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English