363-208-011
Cabling, Wiring, and Assembly
Issue 4 February 1997 3-69
Parallel Telemetry Connections
The parallel telemetry interfaces an optional connection to remote a subset of
alarms and status information to an operations center. The parallel alarm
connections reflect the office alarms as individual closures for critical, major,
minor, and power minor alarm conditions. Status contact closures such as near
end, far end, system identification, ACO output and customer assigned pairs are
also available.
All 50 connections of the ED7C723-37 Group 19-21 cable assembly shall be
made to the customer's alarm block for further cross connections to the
operations center. Refer to Figure 3-48 and the APPLICATIONS section for the
designated pairs and available customer assigned pairs
To Next Page
Loading...
Need help?
General
