MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 11 December 2015
4.2 Startup
Upon power-up, the instrument begins a self-diagnsotic routine, loads all of the
stored data, and displays a company splash screen for approximately three
seconds.
4.3 Instrument Information
Immediately following startup, the instrument will next display pertinent
instrument information. Information contained in this display includes:
Instrument Model Number (Model 9DP-1)
Instrument Serial Number: as assigned by Ludlum Measurements, Inc.
Firmware Version: identifying currently installed firmware.
User ID: This is an optional alpha-numeric field that can be
programmed into the unit to identify the owner
name/department/company etc.
User Serial Number: This is an optional alpha-numeric field that can be
programmed into the unit to identify a unique serial number different
from the instrument serial number assigned it by Ludlum. This may be
useful for tracking company inventory using the owner’s numbering
system.
Calibration Date: the date the instrument was last calibrated.
Calibration Due Date: the date the instrument should next be calibrated.
4.4 Measurement View
The LCD displays the data captured by the ion chamber in a user customized
format which, for the purpose of this manual, is referred to as a “view.”
The view is broken down into three primary areas for displaying the
measurement reading, the operative function, and the status icons. Messages are
displayed in the area relevant to the message content.
To Next Page
Loading...
Need help?
General
