MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 24 December 2015
Day
“Day” represents the current calendar day and is a numeric field. Valid values for
“Day” are 1 to 31.
Note: When selecting the day, any value from 1 to 31 may be entered, as
the instrument does not verify the day versus the number of days
available in the current month; however, the clock will adjust to a valid
date at midnight when the calendar day changes.
Year
“Year” represents the current calendar year and is a numeric field. Valid values
for “Year” are 2000 to 2099.
6.2.4 Clock
“Clock” is a sub-menu which grants access to the “Hours,” “Minutes,”
“Seconds,” and “Format” associated with the clock.
Hours
“Hours” represents the current clock hour in 24-hour notation and is a numeric
field. Valid values for “Hours” are 00 to 23.
Minutes
“Minutes” represents the current clock minutes and is a numeric field. Valid
values for “Minutes” are 00 to 59.
Seconds
“Seconds” represents the current clock seconds and is a numeric field. Valid
values for “Seconds “are 00 to 59.
Format
“Format” represents the format in which clock information is displayed.
“Format” is a special field with valid values of 12 and 24.
6.2.5 Passwords
“Passwords” is a sub-menu which grants access to the “Password Enable,”
“Password 1,” “Password 2,” and “Password 3” fields associated with the
password menu. If passwords are enabled, the instrument will require that a
password be entered into the instrument to allow access to the keyboard menu.
The instrument will compare the entered password against each stored password,
and if a valid match is found, the user will be granted the appropriate level of
To Next Page
Loading...
Need help?
General
