MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 36 December 2015
Current View
“Current View” represents the current operating mode for the measurement
view. “Current View” is a special field with valid values of “View 1,” “View 2,”
“View 3,” and “View 4.”
6.5.2 View 1: R/hr
“View 1: R/hr” is a sub-menu allowing access to the “Appearance,” “Functions,”
“Alerts,” and “Alarms” associated with the “View 1: R/hr”.
Appearance
“Appearance” is a sub-menu allowing access to the “Background Color” and
“Foreground Color” associated with “View 1: R/hr.”
Background Color
“Background Color” represents the color of the background of View 1.
“Background Color” is a special field with valid values of “White,” “Yellow,”
“Light Magenta,” “Light Red,” “Light Cyan,” “Light Green,” “Light Blue,”
“Dark Gray,” “Light Gray,” “Brown,” “Magenta,” “Red,” “Cyan,” “Green,”
“Blue,” “Bright Yellow,” “Bright Magenta,” “Bright Red,” “Bright Cyan,”
“Bright Green,” “Bright Blue,” “Black,” and seven shades of gray.
Foreground Color
“Foreground Color” represents the color of the foreground of View 1.
“Foreground Color” is a special field with valid values of “White,” “Yellow,”
“Light Magenta,” “Light Red,” “Light Cyan,” “Light Green,” “Light Blue,”
“Dark Gray,” “Light Gray,” “Brown,” “Magenta,” “Red,” “Cyan,” “Green,”
“Blue,” “Bright Yellow,” “Bright Magenta,” “Bright Red,” “Bright Cyan,”
“Bright Green,” “Bright Blue,” “Black,” and seven shades of gray.
Functions
“Functions” is a sub-menu allowing the user to set up the four functions that may
be accessed via the function key on the instrument keypad while in View 1.
Each instrument can store up to four functions. These functions are stored at the
instrument level (see Section 6.6). At the view level, the user may select as many
as four functions to have access to, via the Function key on the instrument
keypad. The instrument comes pre-configured with access to the three default
instrument functions.
To Next Page
Loading...
Need help?
General
