MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 25 December 2015
access to the keyboard menu. Press enter when the approved level of access is
displayed to access the keyboard menu or “<- Exit” to exit the keyboard menu. If
the password was not approved, pressing Enter will force the user out of the
keyboard menu, and the user will have to press F1 to try again.
If even one password is left blank, pressing enter with a blank password when a
password is required will grant that user access to the menu at the highest
appropriate password level.
Note: Currently, only one level of passwords exists.
Enable
“Enable” represents the current state of the password system and is a special
field. If the value is “Off,” no password is required to gain access to the keyboard
menu. If the value is “On,” a valid password is required to gain access to the
keyboard menu.
Password 1
“Password 1” represents the user level of keyboard menu access and is a text
field. The field is limited to 16 characters and is case sensitive.
Password 2
“Password 2” represents the manager level of keyboard menu access and is a text
field. The field is limited to 16 characters and is case sensitive.
Password 3
“Password 3” represents the administrator level of keyboard menu access and is a
text field. The field is limited to 16 characters and is case sensitive.
6.2.6 System
“System” is a sub-menu which grants access to the “Firmware Number.”
Firmware Number
“Firmware Number” is the current version of main firmware that the 9DP-1 is
currently using and is a view-only field. This information is necessary when
downloading the appropriate files from the Ludlum website should a firmware
revision be required in the future.
6.3 Controls
“Controls” menu allows the user to set some basic system information regarding
the interface hardware used by the instrument. The two primary controls
available include the LCD “Backlight” and the “Audio” output.
To Next Page
Loading...
Need help?
General
