MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 62 December 2015
Recycling
udlum Measurements, Inc. supports the recycling of the electronics
products it produces for the purpose of protecting the environment and
to comply with all regional, national, and international agencies that
promote economically and environmentally sustainable recycling
systems. To this end, Ludlum Measurements, Inc. strives to supply the consumer
of its goods with information regarding reuse and recycling of the many different
types of materials used in its products. With many different agencies – public and
private – involved in this pursuit, it becomes evident that a myriad of methods
can be used in the process of recycling. Therefore, Ludlum Measurements, Inc.
does not suggest one particular method over another, but simply desires to
inform its consumers of the range of recyclable materials present in its products,
so that the user will have flexibility in following all local and federal laws.
The following types of recyclable materials are present in Ludlum Measurements,
Inc. electronics products and should be recycled separately. The list is not all-
inclusive, nor does it suggest that all materials are present in each piece of
equipment: batteries, glass, aluminum and stainless steel, circuit boards, plastics,
and liquid crystal display (LCD).
Ludlum Measurements, Inc. products, which have been placed on the market
after August 13, 2005, have been labeled with a symbol recognized internationally
as the “crossed-out wheelie bin.” This notifies the consumer that the product is
not to be mixed with unsorted municipal waste when discarding; each material
must be separated. The symbol will be placed near the AC receptacle, except for
portable equipment where it will be placed on the battery lid.
The symbol appears as such:
To Previous Page
Loading...
Need help?
General
