MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 43 December 2015
6.6 Functions
“Functions” menu allows the user to view the instrument functions associated
with the 9DP-1. The 9DP-1 comes pre-configured with two functions and can be
modified to include two additional functions.
6.6.1 FCN 1: Integrate
“FCN 1” represents the function associated with instrument Function 1. The
9DP-1 comes pre-configured with “Integrate” programmed as Function 1. “FCN
1” is a non-editable field.
6.6.2 FCN 2: Peak Rate
“FCN 2” represents the function associated with instrument Function 2. The
9DP-1 comes pre-configured with the “Peak Rate” programmed as Function 2.
“FCN 2” is a non-editable field.
6.6.3 FCN 3: No Function
“FCN 3” represents the function associated with instrument Function 3. The
9DP-1 does not have a Function 3 pre-configured. Additional functions that may
be loaded into the unused function spot will be available soon. “FCN 3” is a non-
editable field.
6.6.4 FCN 4: No Function
“FCN 4” represents the function associated with instrument Function 4. The
9DP-1 does not have a Function 4 pre-configured. Additional functions that may
be loaded into the unused function spot will be available soon. “FCN 4” is a non-
editable field.
To Next Page
Loading...
