LXNAV S80 - 5 Operating Modes

S80 Version 4.92 November 2014
Page 14 of 61
5 Operating Modes
LXNAV S80 has five operating modes. A pilot has access to all of them using the middle
menu push button. The diagram below shows the mode structure of the LXNAV S80.
Info
mode
Flarm
mode
Task
Mode
Waypoint
mode
Setup
mode
• Info Screen: Contains the GPS data from the GPS source Altitude and Battery voltage
• Flarm Screen: Showing Flarm targets in range (if a Flarm device is connected to the
GPS port)
• Waypoint screen: Simple navigation screen to a waypoint
• Task Screen: Task screen showing the task and airspace
• Setup screen: For all aspects of the setup of the S80