Please note that only one Flarmnet file can be loaded at any one time.
5.5.14 Polar and Glider
The Polar and Glider section allows you to load and edit a set of parameters for your
gliders Polar. You can select from a pre-defined list of nearly every common Glider or
make your own Polar.
Select Glider from List: Presents you with an alphabetical list of all the common gliders
and associated Polar data. All glider data will be copied from the chosen polar. Then check
the best glide ratio and minimum sink rate, to see if the polar data matches the glider
performance, you may look in MacCready setting menu.
To Next Page
Loading...
