S80 Version 4.92 November 2014
Page 34 of 61
• Freq at 0% defines the tone frequency at 0 m/s.
• Freq at +100% defines the tone frequency at full + deflection.
• Freq at -100% defines the tone frequency at full – deflection.
Equalization preset
We have three options: default LXNAV speaker, flat setting or user defined.
Beeps requested from PDA
If a PDA is connectedc to the S80 the PDA is able to send a beep command to the S80, if
that feature is enabled, S80 will beep on PDA request.
Thermal Assistant
Is a system generated sound which is different from other vario sounds. This sound helps
the pilot in a thermal by interupting other varios sounds a few secodns before the therml
reaches its maximum lift. The pilot can set how many seconds before thermal maximum or
disable the feature.
Speech Volume
With the Speech volume slider the volume of voice warnings can be changed.
The volume for Vario, Flarm and Speech can also be adjusted directly with the top
rotary knob whilst in the Flarm, Waypoint and Task screens
5.5.5.3
Flarm Sounds
Flarm Volume: can be adjusted with the slider
Flarm Low Alarm: For distant Flarm targets the S80 can give a short or long message,
just a beep or be turned off.
To Next Page
Loading...
