S80 Version 4.92 November 2014
Page 27 of 61
5.5.2 Vario Param.
5.5.2.1
Vario needle filter
Sets a time constant of the vario needle. The value can be adjusted between 0.1 and 5 s
with step 1.0 s or 0.1 s. Default value is 1.5 s.
5.5.2.2
Vario sound filter
Sets a time constant of vario sound. The value can be adjusted between 0.1 and 5 s with
step 1.0 s or 0.1 s. Default value is 1.5 s.
5.5.2.3
Netto filter
Sets a time constant of the Vario Netto needle. The value can be adjusted between 0.1
and 5 s with step 1.0 s or 0.1 s. Default value is 1.5 s.
5.5.2.4
Relative filter
Sets a time constant of the Vario Relative needle. The value can be adjusted between 0.1
and 5 s with step 1.0 s or 0.1 s. Default value is 1.5 s.
5.5.2.5
SC filter
Sets a time constant of the SpeedToFly needle. The value can be adjusted between 0.1
and 5 s with step 1.0 s or 0.1 s. Default value is 1.5 s.
5.5.2.6
Smart Filter
The Smart Filter allows additional filtering of the vertical speed. It defines the difference
between increasing vertical speed versus decreasing vertical speed. (E.g. If the vario filter is
set to 1s and the Smart Filter set to 4s, the filtering for increasing vario would be 1s and for
decreasing vario would be 2s. This will produce an effect similar to a Sage Variometer.)
To Next Page
Loading...
