58
Colors
Each button can have a set of colors assigned to it, making it easier to distinguish between their
different functions, notes, etc. Each button can use up to 4 colors, depending on its function.
To set the color(s) of a button:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the desired button. The button’s number will appear in the display.
3. Press and hold Shift and then press the MIDI Out / Color key the same number of times
as the number of the color:
• 1 press: The display will show COLOR1 for 1 second and then show the button’s
“off” color number.
• 2 presses: The display will show COLOR2 for 1 second and then show the button’s
“first press” color number.
• 3 presses: The display will show COLOR3 for 1 second and then show the button’s
“second press” color number.
• 4 presses: The display will show COLOR4 for 1 second and then show the button’s
“fourth press” color number.
4. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired color
number:
0 Off 4 Magenta
1 Green 5 Red
2 Cyan 6 Yellow
3 Blue 7 White
5. Press the Enter key. The button is now set to use those colors, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
To Next Page
Loading...
Need help?
General
