81
Curve
The curve setting for the pads determines their velocity sensitivity—the amount of force
required to generate a note with a specific velocity.
To set the pad curve:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the Curve key twice. The display will show PCrV and the current curve setting:
Display Curve
Number
Description
PCrVC1
01 This is a low-sensitivity setting, useful for playing notes with mostly
low velocities.
PCrVC2
02 This is a medium-sensitivity setting (the default), useful for playing
with an average amount of force.
PCrVC3
03 This is a high-sensitivity setting, useful for playing notes with
mostly high velocities.
PCrVC4
04 This is a linear curve. The velocity of the note will be proportional
to the amount of force.
PCrVF1
05
All notes will have a fixed velocity of 64.
PCrVF2
06
All notes will have a fixed velocity of 100.
PCrVF3
07
All notes will have a fixed velocity of 127.
PCrVS2
08
All notes will have a velocity of 64 or 127, depending on the
amount of force.
PCrVS3
09
All notes will have a velocity of 64, 100, or 127, depending on the
amount of force.
PCrVS4
10
All notes will have a velocity of 32, 64, 100, or 127, depending on the
amount of force.
3. Use the numeric keys (0–
9) or Preset Down/Up () buttons to enter the desired curve
number (1–10).
4. Press the Enter key. The pads will now use that curve, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
To Next Page
Loading...
Need help?
General
