Magnetek Elevator HPV1000 AC

Need help?

Do you have a question about the Magnetek Elevator HPV1000 AC and is the answer not in the manual?

Summary

HPV1000 AC Elevator Drive Technical Manual

Model Numbers and Ratings

Drive Model Specifications

Lists drive models with their power, current, and input current ratings.

Electrical Installation

Electrical Interconnections and Wiring

Details main and control circuit wiring diagrams, including encoder connections.

Keypad Operation

Operator Interface: LEDs, Display, and Keys

Explains operator LEDs, display messages, and keypad functions.

Programming Parameters (A1 Submenu)

Speed and Motor Control Parameters

Details parameters for elevator speed and motor control settings.

Installation Startup and Autotune Guides

Open-Loop Startup and Autotune

Steps for open-loop startup and performing motor autotuning.

Startup Procedures

Closed-Loop and PM Startup

Setup procedures for closed-loop and PM motor startup.

Autotune and Alignment Procedures

Motor Autotune and Alignment

Detailed steps for autotuning and encoder alignment procedures.

Troubleshooting

Fault, Alarm, and Programming Error Codes

Overview of fault, alarm, and programming error codes and their causes.

Troubleshooting (Communication and Motor)

Communication and Torque Faults

Troubleshooting for communication and torque limit faults.

Motor Control and Current Faults

Explains motor control and current sensor faults.

Troubleshooting (Circuit and Data Errors)

Control Circuit and EEPROM Faults

Details control circuit and EEPROM related faults.

Troubleshooting (Hardware and CPU Errors)

Drive Hardware and CPU Errors

Troubleshooting for drive hardware, CPU, and A/D conversion errors.

Troubleshooting (Speed and Encoder Faults)

Speed Deviation and Encoder Faults

Explains speed deviation and encoder related faults.

Troubleshooting (Motor Pole and Sequence)

Motor Pole Detection and Sequence Errors

Troubleshooting motor pole detection and sequence errors.

Troubleshooting (Auto-Tuning Errors)

Auto-Tuning Completion Errors

Troubleshooting (Motor Data and Tuning Errors)

Motor Data and Tuning Parameter Errors

Troubleshooting (Motor Specific Errors)

Motor Speed and Current Errors

Troubleshooting (Drive Overload and Inductance)

Drive Overload and Inductance Errors

Troubleshooting (Overcurrent and Option Cards)

Overcurrent and Motor Overload Faults

Option Card Compatibility Errors

Troubleshooting (Option Card Errors)

Option Port CN5-A Errors

Option Port CN5-B Errors

Troubleshooting (Option Card Errors Continued)

Option Port CN5-A;B;C Errors

Encoder and Signal Level Errors

Troubleshooting (Encoder and Temperature)

Encoder Signal and Temperature Faults

Troubleshooting (Motor Overheat and Overload)

Motor Overheat Protection

Motor Overload Protection

Troubleshooting (Drive Capacity and Input)

Drive Capacity and Parameter Range Errors

Input and Board Mismatch Errors

Troubleshooting (Parameter and Input Errors)

Parameter and Input Configuration Errors

Overspeed and Encoder Frequency Errors

Troubleshooting (Overload and Fault Conditions)

Drive Overload and Torque Faults

Fault Conditions and Input Assignments

Troubleshooting (Drive Faults Summary)

Motor and Encoder Related Faults

Undertorque and Overcurrent Faults

Drive Faults and Disconnection Errors

Various Drive Faults

Troubleshooting (Input Voltage and Phase)

Input Voltage and Phase Loss Faults

Output Voltage and Bypass Faults

Troubleshooting (Output Voltage and Control)

Output Voltage and Bypass Circuit Faults

Input Power and Control Circuit Faults

Troubleshooting (Motor Control)

Motor Control and Torque Faults

Motor Stall and IGBT Faults

Safety Instructions and General Warnings

General Safety Precautions

General safety precautions for drive installation and operation.

Safety Message Conventions

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE messages.

Safety Messages and Hazards

Electrical Shock and Sudden Movement Hazards

Warnings regarding electrical shock and unexpected drive movement.

Safety Precautions for Operation and Maintenance

PM Motor and Wiring Safety

Safety advice for PM motors, wiring, and fire hazards.

Equipment Hazards and Application Precautions

Equipment Hazard Warnings

Warnings for equipment hazards like ESD and damage.

General Application Precautions

Precautions for motor selection, starting torque, and stopping.

Operation and Maintenance Safety

PM Motor Operation Safety

Safety for PM motor operation and maintenance.

Fire Hazards and Material Safety

Precautions related to fire hazards and materials.

Drive Label Warnings

Electrical Shock Hazard Warnings

Warnings about electrical shock hazards.

Warning Label Details

Description and location of the drive warning label.