EasyManua.ls Logo

Magnetrol eclipse Enhanced Model 705 - User Manual

Magnetrol eclipse Enhanced Model 705
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Guided Wave Radar
Level Transmitter
Enhanced Model 705
Software v3.x
Installation and Operating Manual
for use in the Hygienic Industries
ASME BPE

Table of Contents

Questions and Answers

  • C
    Cindy HernandezAug 25, 2025
    Why is level reading stuck at full scale and loop stuck at 20.5 mA on Magnetrol eclipse Enhanced Model 705 Transmitter?
    • C
      Christopher DavisAug 26, 2025
      If the Level Reading on the Display is stuck at full scale, and the loop is stuck at 20.5 mA, the software might believe the probe is flooded. Check the actual level. If the probe is not flooded, check for buildup or obstructions near the top of the probe and select a higher dielectric range. Also, check for condensation in the probe connection and consider adding Blocking Distance.
  • D
    David MolinaAug 23, 2025
    What to do if LEVEL, % OUTPUT, and LOOP values fluctuate on Magnetrol Transmitter?
    • T
      Timothy GriffithAug 25, 2025
      If the LEVEL, % OUTPUT, and LOOP values are fluctuating, it might be due to turbulence. Increase the Damping factor until the readings stabilize.

Magnetrol eclipse Enhanced Model 705 Specifications

General IconGeneral
TypeGuided Wave Radar Level Transmitter
ApplicationLevel Measurement
Measurement RangeUp to 30 m
Accuracy± 3 mm (0.12 inch)
Output Signal4-20 mA HART
Power Supply12 to 42 VDC
Process Temperature-196 to 400°C (-320 to 752°F)
Process PressureUp to 40 bar (580 psi)
ApprovalsATEX, IECEx, FM, CSA
Communication ProtocolHART
Enclosure RatingIP66/67, NEMA 4X
Material316L Stainless Steel, Hastelloy C-276
CommunicationHART
Process ConnectionThreaded, flanged

Related product manuals