Man B&W L35MC6-TII - Alarms for UMS - Class and man Diesel Requirements

MAN B&W 18.04
Page  of 7
MAN Diesel
MAN B&W MC/MCC engines 198 62 364.2
Alarms for UMS – Class and MAN Diesel requirements
ABS BV CCS DNV GL KR LR NK RINA RS IACS MAN Diesel
Sensor and
function Point of location
Fuel oil
1 1 1 1 1 1 1 1 1 1 1 1 PT 8001 AL Fuel oil, inlet engine
1 1 1 1 1 1 1 1 1 1 1 1 LS 8006 AH Leakage from high pressure pipes
Lubricating oil
1 1 1 1 1 1 1 1 1 1 1 1 TE 8106 AH Thrust bearing segment
1 1 1 1 1 1 1 1 1 1 1 1 PT 8108 AL Lubricating oil inlet to main engine
1 1 1 1 1 1 1 1 1 1 1 1 TE 8112 AH
Lubricating oil inlet to main engine
1 1 1 1 1 1 1 1 1 1 1 TE 811 AH Piston cooling oil outlet/cylinder
1 1 1 1 1 1 1 1 1 1 1 FS 8114 AL Piston cooling oil outlet/cylinder
1 1 1 1 1 1 1 1 1 1 TE 8117 AH Turbocharger lubricating oil outlet from
turbocharger/turbocharger
1 TE 812 AH Main bearing oil outlet temperature/main bearing
(Only MC types 42-26)
1 XC 8126 AH Bearing wear (K98MC6/7 and all MC-C types); sensor
common for XC 8126/27
1 XS 8127 A Bearing wear detector failure (K98MC6/7 and types
98-60MC-C)
1 XS 8150 AH Water in lubricating oil (All MC/MC-C types except
S80-50MC6); sensor common for XS 8150/51/52
1 XS 8151 AH Water in lubricating oil – too high (All MC/MC-C types
except S80-50MC6)
1 XS 8152 A Water in lubricating oil sensor not ready (All MC/MC-C
types except S80-50MC6)
1 Indicates that the sensor is required.
The sensors in the MAN Diesel column are included for Unattended Machinery Spaces (UMS), option: 4 75 127.
The sensor identication codes and functions are listed in Table 18.07.01.
The tables are liable to change without notice, and are subject to latest class requirements.
Table 18.04.02a: Alarm functions for UMS