Man B&W L35MC6-TII User Manual

MAN B&W L35MC6-TII 198 75 58-1.1
This Project Guide is intended to provide the information necessary for the layout of a marine propulsion
plant.
The information is to be considered as preliminary. It is intended for the project stage only and subject to
modification in the interest of technical progress. The Project Guide provides the general technical data
available at the date of issue.
It should be noted that all figures, values, measurements or information about performance stated in this
project guide are for guidance only and should not be used for detailed design purposes or as a substi-
tute for specific drawings and instructions prepared for such purposes.
Data updates
Data not finally calculated at the time of issue is marked ‘Available on request’. Such data may be made
available at a later date, however, for a specific project the data can be requested. Pages and table entries
marked ‘Not applicable’ represent an option, function or selection which is not valid.
The latest, most current version of the individual Project Guide sections are available on the Internet at:
www.mandieselturbo.com under ‘Products’ → ‘Marine Engines & Systems’ → ‘Low Speed’.
Extent of Delivery
The final and binding design and outlines are to be supplied by our licensee, the engine maker, see Chap-
ter 20 of this Project Guide.
In order to facilitate negotiations between the yard, the engine maker and the customer, a set of ‘Extent of
Delivery’ forms is available in which the basic and the optional executions are specified.
Electronic versions
This Project Guide book and the ‘Extent of Delivery’ forms are available on a DVD and can also be found
on the Internet at: www.mandieselturbo.com under ‘Products’ → ‘Marine Engines & Systems’ → ‘Low
Speed’, where they can be downloaded.
1st Edition
April 2010
MAN B&W L35MC6-TII
Project Guide
Camshaft Controlled
Twostroke Engines

Man B&W L35MC6-TII Specifications

General

Brand	Man
Model	B&W L35MC6-TII
Category	Engine
Language	English

Summary

MAN B&W L35MC6-TII Project Guide

Camshaft Controlled Two-stroke Engines

Overview of the project guide for camshaft controlled two-stroke engines.

Contents

Engine Design

Details on the fundamental design aspects of the engine.

Engine Layout and Load Diagrams, SFOC

Explains engine layout, load diagrams, and Specific Fuel Oil Consumption (SFOC).

Turbocharger Selection & Exhaust Gas By-pass

Information on selecting turbochargers and exhaust gas by-pass systems.

Electricity Production

Covers power generation, including PTO and auxiliary systems.

Installation Aspects

Discusses site requirements, crane beams, and engine seating.

List of Capacities: Pumps, Coolers & Exhaust Gas

Details capacities of auxiliary pumps, coolers, and exhaust gas components.

Fuel

Information on fuel oil systems, pipes, and heating.

Lubricating Oil

Covers lubricating and cooling oil systems, pipes, and components.

Cylinder Lubrication

Details cylinder lubrication systems, Alpha lubricators, and oil consumption.

Piston Rod Stuffing Box Drain Oil

Explains the stuffing box drain oil system.

Central Cooling Water System

Describes the central cooling water system, its advantages, and disadvantages.

Seawater Cooling

Details seawater cooling systems and components.

Starting and Control Air

Covers starting and control air systems and components.

Scavenge Air

Details scavenge air systems, blowers, and coolers.

Exhaust Gas

Covers exhaust gas systems, pipes, and turbochargers.

Engine Control System

Explains engine control systems, manoeuvring, and governors.

Vibration Aspects

Discusses vibration characteristics, unbalanced moments, and guide forces.

Monitoring Systems and Instrumentation

Covers monitoring systems, PMI, CoCoS-EDS, and alarms.

Dispatch Pattern, Testing, Spares and Tools

Details dispatch patterns, shop trials, spare parts, and tools.

Project Support and Documentation

Information on project support, documentation, and engine selection guides.

Appendix

Contains supplementary information, such as symbols for piping.