Special tools
171
Special tools for high- and low-temperature coolant pump
Fig. no. Designation Item number
36 Pressing plate / pressing in the coolant pump bearing,coolant pump shaft
and V-belt pulley
80.99604−0251
37 Pressing mandrel / pressing the axial face seal into the pump housing 80.99604−0252
38 Base plate for various pressing jobs 80.99614−0027
39 Pressing mandrel / pressing the deep-groove ball bearing into the HT
pump housing
80.99604−0254
40 Support for coolant pump housing for pressing on the V-belt pulley 80.99606−0628
41 Support for coolant pump housing for pressing in the V-belt pump shaft 80.99606−0629
42 Press-in mandrel for axial face seal 80.99617−0191
43
43.1
Assembly device for pump housing
consisting of::
Plate
80.99606−6128
80.99606−0631
43.2 Pick−up pins 80.99606−0632
43.3 Mouting bolts 06.02192−0308
44 Detachable handle for all press−in plates and clamps
consisting of::
80.99617−6006
44.1 Handle 80.99617−0187
44.2 Disc 80.99617−0144
45 M5 bolt with left−handed thread for installing coolant pump 80.99606−0642
46 Centring pin for installation of coolant pump 80.99606−0643
47 Bush for pressing in end cover (no fig.) 80.99604−0263
To Next Page
Loading...