9-17
GRT8100 SERVICE MANUAL LUBRICATION
Published 3/26/2018, Control # 596-05
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube Capacity Lube Interval Application
Turntable
40
Turntable Gear
Box
Figure 9-7 H
5.4 L
(5.7 qt)
• Check and fill every
50 hours
• Drain and fill after
first 250 hours and
every 500 hours or
12 months thereafter.
Fill to max level on
level plug.
41
Turntable Gear
and Drive Pinion
Figure 9-7 G Coat all teeth 500 hours or 6 months Spray on
42
Turntable
Bearing
Figure 9-7 A
Until grease
extrudes from
entire bearing
circumference
500 hours or 6 months
2 grease fittings at
front of turntable.
NOTE: Rotate turntable 90° and apply grease to fittings. Continue rotating in 90° increments and grease fittings until
entire bearing is greased.