LUBRICATION GRT8100 SERVICE MANUAL
9-22
Published 3/26/2018, Control # 596-05
88
Retract Cable
Sheaves
Figure 9-12
&
Figure 9-13
A
Until grease
extrudes
250 hours or 3 months
• 4 grease fittings
• Extend Tele 2 to
38.2 Meters
(125.3 FT) so
the access
holes align with
the grease
fittings.
NOTE: Lubricate items more frequently than interval in table if environmental conditions and/or operating conditions
require.
CAUTION: Do not apply excessive pressure or force when greasing wear pads. This can cause grease fitting to separate
from wear pad. Only apply grease until resistance is felt.
To Next Page
Loading...
