47
Click Send the DSP codes.
Software is written into the DSP flash microprocessor.
The writing of software takes about 7 minutes.
Click OK. And the writing software is shut down automatically.
Disconnect the mains cable from the Unit.
Send the DSP codes
ǛǯȪȃǯƠLJƢŵ
ƖᡂLjƕڼƞǕǹȆȸǿǹȐȸƕЈLJƢŵ
ƜƷǽȕȈǦǧǢƷƖᡂLj᧓ƸƓǑƦᲱЎưƢŵ
OK ǛǯȪȃǯƠLJƢŵƖᡂLjǽȕȈǦǧǢƸᐯѣႎƴኳʕ
ƠLJƢŵ
ᩓเdzȸȉǛஜೞƔǒٳƠLJƢŵ
To Next Page
Loading...
