marposs P1 - Packing, Movement, and Transport; P1 Storage Guidelines

Instruction Manual
P1
Instruction Manual
15
1.4 Packing, movement, transport
1.4.1 Packing
The P1 is protected with carton and an internal insert for the movement and transport operations.
1.4.2 Moving the package
The package can be lifted manually as set out by the general health and safety standards in the work place
for manually moving loads, especially when lifting a load from the ground.
1.4.3 Transporting the package
The package containing the P1 must be transported with covered transport equipment to prevent exposing
the package and the P1 to atmospheric agents.
1.4.4 Disposing of the packing material
The packaging used for the P1 consists of materials that are not dangerous, in terms of disposal, for people,
animals or materials.
The operators assigned to disposal must bear in mind that the packaging consists of:
• Carton: external container and internal insert
• Polyurethane film: internal insert.
DANGER FOR THE ENVIRONMENT
The polyurethane film is NOT biodegradable. Do not dispose of it in the surrounding
environment: recycle and/or dispose in compliance with the applicable standards in the
destination country.
1.5 Storage
1.5.1 General Information
The mechanical and electronic components installed in the P1 have been selected based on their reliability
and resistance. The components comply with the applicable construction requirements in terms of safety and
have been designed to support transport and storage temperatures between –20 °C a +70 °C (-4° F
÷
158°
F).
1.5.2 Storing the P1
The P1 must be stored in covered premises with limited exposure to dust and humidity.
The warehouse flooring must be horizontal and free of irregularities.
Do not position other materials, even light items, on top of the P1 package or the P1 itself, in order to avoid
damaging it.